Test
For Flame Ionization Detector (FID).
FID JET UNIVERSAL FIT 0.018 ..
Kit includes: detector assembly with heater and sensor, heater block, igniter, programmable pneumatics, and controls for detector combustion gases. Requires, but does not include, amplifier (N6120162) and AutoSystem XL firmware revision 3.3 or higher. The AutoSystem XL must be PPC ready. If not, a PPC upgrade kit (N6120146) is required.
NC2894630 FLAME IONIZATION DETECTOR
Achieve extremely sensitive detection of organic compounds over a wide linear dynamic range using the Thermo Scientific™ iConnect™ Flame Ionization Detector (FID) for TRACE™ 1300 and 1600 Series GC systems. The detector's small cell volume and rapid acquisition response make it ideal for both standard and fast chromatography.
Designed with space saving in mind, it sits directly under the GC to conserve bench space. You can also apply the FID gas station to GCMS systems with the simple addition of a drawer tray for the MS to rest on. If you want to benefit from the space saving design, but only require a H2 generator, that is also an option. H2 Flow Rate: 150 mL/min Zero Air Flow Rate: 5 L/min Zero Air Purity: <0.1 ppm Certifications: CE, CSA, FCC
Designed with space saving in mind, it sits directly under the GC to conserve bench space. You can also apply the FID gas station to GCMS systems with the simple addition of a drawer tray for the MS to rest on. If you want to benefit from the space saving design, but only require a H2 generator, that is also an option. H2 Flow Rate: 260 mL/min Zero Air Flow Rate: 5 L/min Zero Air Purity: <0.1 ppm Certifications: CE, CSA, FCC
Not compatible with the FID detector on the Clarus 690 and 590 GCs.
For use with Auto-Ignite Flame Ionization Detector (FID).
Replacement body assembly for with Auto-Ignite Flame Ionization Detector (FID).
For use with Nitrogen-Phosphorous Detector (NPD).
Also available in brown (N6103225).
Not compatible with the FID detector on the Clarus 690 and 590 GCs.
Includes Head Cap and Glow Plug.